Selling (Tools)

Sunpro DC Power Timing Light

Condition: Used, with original box. The timing light and attached leads are pictured. Box shows noticeable wear. Working condition has not been tested.

Purpose: Used to check and adjust ignition timing on gasoline engines, including older automotive and some marine engines.

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Signature 22P Stainless Steel Dual Propeller Set

Matched pair of four-blade stainless steel marine propellers for a dual-propeller sterndrive system.

Manufacturer: Signature
Pitch: 22P (22-inch pitch)
Configuration: Counter-rotating dual propellers
Quantity: 2 propellers — sold as one set
Material: Stainless steel
Compatibility: Exact drive application not confirmed

Condition: Used, good overall appearance. Some surface scratches and oxidation inside the hubs. No obvious major blade damage visible.

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Nelson Heavy-Duty Exhaust Clamp (3.5")

Manufacturer: Nelson Industries, Inc.
Part Number: 89557K
Size: 3.50 inches
Quantity: 1
Made in: USA

Condition: Appears new and unused, in original packaging.

Purpose: Heavy-duty U-bolt exhaust clamp with mounting saddle, designed to secure 3½-inch exhaust piping. Commonly used on diesel engines, trucks, and industrial equipment.

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Catalina Aluminum Scuba Tank with Sherwood Valve PONY TANK

Manufacturer: Catalina Cylinders
Valve: Sherwood Scuba Valve
Material: Aluminum
Working Pressure: 3,000 PSI (DOT-3AL)
Manufacture Date: Appears to be October 2014 (unconfirmed)
Quantity: 1
Labeling: Enriched Air (Nitrox)

Condition: Used, with considerable paint wear, scratches, and visible corrosion around the valve. The tank appears externally intact, but its internal condition is unknown. Hydrostatic testing and visual inspection status have not been verified.

Purpose: Aluminum scuba cylinder designed for storing compressed breathing gas for recreational diving. Labeled for Nitrox service, although current Nitrox compatibility has not been verified.

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Steel Letter & Number Stamp Set (27 Pieces)

Manufacturer: Unknown
Type: Steel Hand-Stamping Punch Set
Quantity: 27 punches
Characters: Appears to include A–Z alphabet plus one additional character
Punch Length: Approximately 2¼ inches
Material: Hardened Steel
Storage: Wooden organizing block

Condition: Used, with some surface oxidation and general wear. Stamping characters appear reasonably intact. Wooden organizing block has additional empty holes. Stamping performance has not been tested.

Purpose: Steel hand-stamping punches designed for permanently marking letters and identification characters into metal surfaces. Useful for marking tools, machinery, boat equipment, metal identification plates, and general workshop applications.

Asking Price: $15

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Central Machinery 6" Belt & Disc Sander

Manufacturer: Central Machinery
Type: Combination Belt & Disc Sander
Motor: ½ HP
Voltage: 110V
Speed: Approximately 1,720 RPM
Features: Adjustable vertical sanding belt, sanding disc, and worktable
Quantity: 1

Condition: Used, with dust and general signs of workshop use. Equipment appears complete, including sanding belt, disc, and worktable.

Purpose: Combination belt and disc sander designed for sanding, shaping, smoothing, and finishing wood, metal, and other materials when used with appropriate abrasives. Useful for boat maintenance, woodworking, metal fabrication, and general workshop applications.

Asking Price: $75

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Intergram Heavy-Duty 5-Speed Floor Drill Press

Manufacturer: Intergram Machinery Tool Co.
Model: AG 5 B
Motor: ½ HP
Speeds: 5
Year Manufactured: 1989 (per identification plate)
Serial Number: 184360
Type: Floor-Standing Drill Press
Quantity: 1

Features: Adjustable circular cast-iron worktable, depth adjustment, keyed drill chuck, built-in work light, and heavy cast-iron base.

Condition: Used, vintage equipment with general signs of workshop use. Appears complete, including the motor, chuck, worktable, and base. 

Purpose: Heavy-duty floor-standing drill press designed for accurate drilling of wood, metal, plastics, and other materials using appropriate drill bits and speeds. Suitable for marine maintenance, fabrication, machine shops, and general workshop applications.

Asking Price: $100

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

12" Commercial Fishing Float / Buoy with Rope Netting

Type: Commercial Fishing Buoy / Net Float
Marking: 300M (molded into float)
Color: Orange
Diameter: Approximately 12 inches, including rope netting
Material: Hard Plastic Float with Rope Netting
Quantity: 1

Features: Traditional knotted rope harness surrounding the float, with a gathering point for attachment.

Condition: Used, fair to good condition. Rope netting shows weathering, and the float has surface scratches and discoloration. No obvious major cracks are visible. Watertight condition has not been verified.

Purpose: Large commercial fishing float suitable for fishing operations, marine applications, nautical displays, and coastal decorations. May appeal to commercial fishermen, marine collectors, restaurants, and coastal homeowners.

Asking Price: $25

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Drill Master Dual-Temperature Heat Gun

Manufacturer: Drill Master
Model: 62340
Power: 1,500 Watts
Voltage: 120V AC
Temperature Settings: 600°F / 1,000°F
Type: Dual-Temperature Electric Heat Gun
Quantity: 1

Condition: Used, fair cosmetic condition. Dusty with visible signs of workshop use. Power cord is included. 

Purpose: Electric heat gun designed for heat-shrink tubing, paint removal, adhesive softening, and general workshop applications. Useful for marine electrical work, boat maintenance, automotive repairs, and general fabrication projects.

Asking Price: $10

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Makita Heavy-Duty Angle Grinder

Manufacturer: Makita
Type: Corded Electric Angle Grinder
Model: Not Fully Legible
Voltage: 120V AC
Side Handle: Included
Power Cord: Included
Grinding Wheel: Not Included
Quantity: 1

Condition: Used, fair cosmetic condition with significant signs of workshop use. The spindle and metal gear housing show oxidation. Auxiliary side handle and power cord are included. Grinding wheel is not included, and the presence of a proper wheel guard has not been confirmed. 

Purpose: Heavy-duty electric angle grinder designed for grinding, cutting, surface preparation, rust removal, and general metal fabrication when equipped with appropriate accessories. Useful for marine maintenance, welding, automotive repairs, and workshop applications.

Important: Before operating, inspect the power cord and wiring, verify that the proper wheel guard is installed, and ensure that any grinding or cutting wheel is correctly rated and securely mounted.

Asking Price: $20

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Chicago Electric 10" Industrial Table Saw

Manufacturer: Chicago Electric Power Tools (Harbor Freight)
Type: Industrial Table Saw
Blade Size: 10 inches
Motor: 15 Amps
Voltage: 120V AC
Speed: 4,800 RPM
Arbor Size: ⅝ inch
Accessories: Rip Fence and Extension Tables
Quantity: 1

Condition: Used, fair to good cosmetic condition with visible signs of workshop use. Rip fence and extension tables appear to be included. 

Purpose: Electric table saw designed for cutting lumber, plywood, and other wood materials. Features adjustable blade height and bevel settings for straight, angled, and rip cuts. Suitable for boat maintenance, carpentry, construction, and general workshop applications.

Asking Price: $100

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Chicago Electric Compound Miter Saw

Manufacturer: Chicago Electric Power Tools (Harbor Freight)
Type: Compound Miter Saw
Blade Size: Appears to be 10 inches (unconfirmed)
Construction: Cast-Metal Base and Cutting Table
Features: Adjustable Miter Angles, Pivoting Saw Head, Blade Guard, and Rear Fence
Blade: Carbide-Tipped Blade Installed
Quantity: 1

Condition: Used, fair to good cosmetic condition with dust and general signs of workshop use. Saw appears largely complete, including the blade guard, rear fence, and installed blade. 

Purpose: Electric compound miter saw designed for making straight, angled, and bevel cuts in lumber, trim, molding, and other wood materials. Suitable for boat maintenance, carpentry, construction, and general workshop applications.

Important: Power cord, blade condition, safety guard operation, and cutting performance should be inspected and verified before use.

Asking Price: $75

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Black & Decker 7¼" Circular Saw

Manufacturer: Black & Decker
Model: CS1000L, Type 1
Type: Corded Electric Circular Saw
Blade Size: 7¼ inches (184 mm)
Motor: 12 Amps
Voltage: 120V AC
Speed: 5,000 RPM
Features: Adjustable Cutting Depth and Bevel
Quantity: 1

Condition: Used, fair cosmetic condition with dust, minor surface rust, and general signs of workshop use. Saw appears complete, including the power cord, base plate, blade guard, and installed saw blade.

Purpose: Corded electric circular saw designed for cutting lumber, plywood, and other wood materials. Features adjustable cutting depth and bevel settings for straight and angled cuts. Suitable for boat maintenance, carpentry, construction, and general workshop applications.

Important: Power cord, blade condition, blade guard operation, and cutting performance should be inspected and verified before use.

Asking Price: $25

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Makita Industrial Heat Gun

Manufacturer: Makita
Type: Corded Electric Industrial Heat Gun
Model: Appears to be HG-Series (exact model unconfirmed)
Voltage: 120V AC
Features: Adjustable Heat Settings, Metal Nozzle, Pistol-Grip Handle
Quantity: 1

Condition: Used, fair cosmetic condition with heavy dust, paint residue, and visible signs of workshop use. Metal nozzle and power cord are included.

Purpose: Industrial electric heat gun designed for heat-shrink tubing, paint removal, adhesive softening, loosening stubborn materials, and general workshop applications. Useful for marine electrical work, boat maintenance, automotive repairs, and fabrication projects.

Asking Price: $10

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

T&S Brass Commercial Retractable Hose Reels (Pair)

Manufacturer: T&S Brass and Bronze Works, Inc.
Type: Spring-Retractable Commercial Hose Reels
Model: Identification Labels Damaged (Exact Models Unconfirmed)
Construction: Heavy-Duty Metal Housings
Mounting: Floor, Wall, or Overhead (Subject to Model Specifications)
Accessories: Attached Hoses and Mounting Brackets
Quantity: 2 Hose Reels

Condition: Used, fair to good cosmetic condition with dust, some corrosion, and general signs of commercial use. Both reels include metal housings, mounting brackets, and attached hoses. Retraction mechanisms, hose integrity, and operational condition have not been tested or verified.

Purpose: Heavy-duty commercial spring-retractable hose reels designed for washdown, cleaning, and general water-handling applications, subject to hose and model specifications. Suitable for commercial fishing vessels, marine facilities, seafood processing operations, industrial workshops, and other commercial washdown environments.

Asking Price: $200 for the Pair ($100Each)

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the items.

EcoPlus Commercial Water Chillers (3 Units)

Manufacturer: EcoPlus
Type: Commercial Water Chillers
Quantity: 3 Units
Unit 1: EcoPlus ½ HP Water Chiller
Unit 2: EcoPlus ¼ HP Water Chiller
Unit 3: EcoPlus ¼ HP Water Chiller
Accessories: No External Pumps or Plumbing Connections Visible

Condition: Used, with dust and normal cosmetic wear from previous use and storage. All three units appear externally intact. 

Purpose: Commercial water chillers designed to regulate and maintain water temperatures in circulating water systems. Commonly used for hydroponics, aquaculture, aquarium systems, and other temperature-controlled water applications. May also be useful for specialized marine and seafood-handling operations, depending on system requirements.

Asking Price:

½ HP EcoPlus Chiller – $200
¼ HP EcoPlus Chiller – $125
¼ HP EcoPlus Chiller – $125

Complete Set of 3: $400

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the items.

Commercial Stainless Steel Utility Sink with Drainboard

Manufacturer: American Dish Service (Branding Appears on Label; Unconfirmed)
Type: Commercial Stainless Steel Utility Sink
Material: Stainless Steel
Configuration: Single Basin with Right-Side Drainboard
Faucet: Commercial Hot/Cold Mixing Faucet
Construction: Freestanding, Four-Leg Design
Features: Large Basin, Drainboard, Backsplash, and Faucet
Dimensions: Not Yet Measured
Quantity: 1

Condition: Used, fair cosmetic condition with substantial dirt, residue, and signs of outdoor storage. Sink appears largely complete, including the basin, right-side drainboard, backsplash, faucet, and supporting legs. 

Purpose: Heavy-duty commercial stainless steel utility sink designed for washing, cleaning, food preparation, and general utility applications. Suitable for restaurants, commercial fishing operations, seafood processing facilities, workshops, and other commercial or industrial environments.

Asking Price: $200

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Heavy-Duty Marine Davit / Hoist Assembly

Manufacturer: Unknown
Type: Marine Davit / Equipment Hoist Assembly
Material: Appears to be Galvanized Steel or Aluminum (Unconfirmed)
Components: Angled Boom, Mounting Brackets, Winch Assembly, and Supporting Structure
Lifting Capacity: Unknown
Quantity: 1

Condition: Used, fair cosmetic condition with weathering and signs of outdoor storage. Assembly appears to include the boom, mounting hardware, supporting structure, and winch mechanism. Completeness, structural integrity, and operational condition have not been tested or verified.

Purpose: Heavy-duty lifting assembly that appears designed for marine or industrial equipment handling. Potential applications include lifting fishing gear, equipment, and other loads aboard vessels or at dockside facilities, subject to verification of its intended use and rated lifting capacity.

Important: Manufacturer specifications and safe working load are unknown. The assembly must be professionally inspected, its lifting capacity verified, and its mounting and winch components evaluated before being used to lift any load. Not intended for lifting personnel.

Exclusions: Orange extension cord and adjacent machinery shown in photographs are not included.

Asking Price: $200

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Chicago Electric Heavy-Duty Drill with Mixing Paddle

Manufacturer: Chicago Electric Power Tools
Type: Corded Electric Drill with Mixing Paddle
Voltage: 120V AC
Accessories: Long Steel Mixing Shaft with Rectangular Double-Loop Mixing Paddle
Quantity: 1 Complete Assembly

Condition: Used, fair cosmetic condition with significant paint residue, surface wear, and general signs of workshop use. Drill includes an attached long steel mixing shaft and rectangular double-loop mixing paddle. Works

Purpose: Heavy-duty electric drill equipped with a mixing paddle designed for blending paint, plaster, mortar, coatings, and other compatible materials. Useful for marine maintenance, boat repairs, construction, painting, and general workshop applications, provided the drill and paddle are suitable for the material being mixed.

Asking Price: $20

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Wagner Power Stripper Heat Gun

Manufacturer: Wagner
Model: Power Stripper (Exact Model Number Unconfirmed)
Type: Electric Heat Gun / Paint Stripper
Voltage: 120V AC
Made in: USA
Power Cord: Included
Quantity: 1

Condition: Used, fair cosmetic condition with noticeable paint residue, scratches, and general signs of workshop use. Vintage Wagner construction with visible wear consistent with age. Power cord is present and appears visually intact. No additional accessories are included.

Purpose: Electric heat gun designed for stripping paint, softening adhesives, removing old finishes, and general heat applications. Useful for boat maintenance, marine restoration, woodworking, furniture refinishing, and general workshop projects.

Asking Price: $15

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Vintage Baldor Industrial Bench Buffer / Wire Wheel Grinder

Manufacturer: Baldor
Catalog Number: Appears to be 7307 (Unconfirmed)
Type: Dual-Ended Industrial Bench Buffer / Grinder
Construction: Heavy-Duty Cast-Metal Motor Housing and Mounting Base
Attachments: Wire Brush Wheel and Cloth Buffing/Polishing Wheel
Power Cord: Included
Quantity: 1

Condition: Used, fair cosmetic condition with significant paint wear, surface oxidation, and general signs of age and workshop use. Features a heavy-duty cast-metal motor housing and substantial mounting base. Wire brush wheel and cloth buffing wheel are included. No wheel guards are visible.

Purpose: Heavy-duty industrial bench-mounted buffer and wire wheel grinder designed for metal cleaning, rust removal, surface preparation, polishing, and finishing. Suitable for marine maintenance, boatyards, machine shops, metal fabrication, restoration projects, and general workshop applications.

Important: Wheel guards are not visible. Proper guarding, wheel condition, electrical wiring, and secure mounting should be addressed before use.

Asking Price: $75

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Century Marine Deep Cycle Battery Charger

Manufacturer: Century
Model: 87122
Type: Automatic Marine & Automotive Battery Charger
Battery Voltage: 6V / 12V
Charging Output: 12 Amps
Engine Start Assistance: 70 Amps
Features: Automatic Shutoff, Analog Charge Meter, Reverse-Connection Indicator
Accessories: Attached Charging Cables with Positive and Negative Clamps
Quantity: 1

Condition: Used, fair cosmetic condition with dust, general signs of workshop use, and some surface rust on the battery clamps. Heavy-duty metal housing with analog charge meter and attached charging cables.

Purpose: Automatic battery charger designed for charging compatible 6V and 12V automotive and marine batteries, including supported deep-cycle batteries. Features selectable charging modes, automatic shutoff, and a 70-amp engine-start assistance function. Useful for boat maintenance, automotive service, marine workshops, and general battery maintenance.

Asking Price: $40

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Makita Finishing Sander, Model BO4550

Manufacturer: Makita
Model: BO4550
Type: Electric Orbital Finishing Sander
Voltage: 115V AC
Motor: 1.6 Amps
Speed: 14,000 OPM
Sanding Pad: Rectangular, Approximately 4 × 4½ Inches
Power Cord: Included
Quantity: 1

Condition: Used, fair cosmetic condition with heavy dust, scratches, and general signs of workshop use. Older Makita construction featuring a compact palm-grip design and rectangular sanding pad.

Purpose: Electric orbital finishing sander designed for smoothing wood surfaces, preparing surfaces for painting, furniture refinishing, cabinetry, and general woodworking applications. Particularly useful for boat maintenance, marine carpentry, small sanding projects, and detailed surface preparation.

Asking Price: $15

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Router Table with Adjustable Fences and Safety Guard

Manufacturer: Unknown (Possibly Older Craftsman-Style Design)
Type: Benchtop Woodworking Router Table
Table Width: Approximately 20 Inches
Construction: Ribbed Metal Work Surface
Features: Two Adjustable Fence Sections with Wooden Faces and Orange Overhead Cutter Guard
Accessories: Adjustable Fences and Safety Guard
Router: Not Included
Quantity: 1

Condition: Used, fair to good cosmetic condition with dust and normal signs of workshop use. Metal work surface and adjustable fence sections appear intact. Includes wooden fence faces and an orange overhead cutter guard. Router mounting compatibility and completeness of mounting hardware have not been confirmed.

Purpose: Benchtop woodworking router table designed to accommodate a compatible handheld router mounted beneath the work surface. Suitable for edge shaping, trimming, cutting grooves, decorative woodworking, and general wood fabrication. Useful for marine carpentry, boat restoration, cabinetry, furniture making, and general woodworking projects.

Asking Price: $25

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Vintage Milwaukee Sawzall Reciprocating Saw with Metal Case

Manufacturer: Milwaukee Electric Tool Corporation
Model: Exact Model Number Not Fully Legible
Type: Heavy-Duty Corded Reciprocating Saw
Voltage: 120V AC
Motor: Approximately 10 Amps
Accessories: Original Red Milwaukee Super Sawzall Metal Carrying Case and Assorted Saw Blades
Quantity: 1 Complete Set

Condition: Used, fair cosmetic condition with substantial signs of age and workshop use. Saw shows general surface wear and dust. Original red Milwaukee metal carrying case has visible paint loss, scratches, and wear consistent with age. Includes assorted reciprocating saw blades.

Purpose: Heavy-duty electric reciprocating saw designed for cutting wood, metal, piping, and other materials using appropriate blades. Suitable for marine maintenance, boat repairs, demolition, construction, metal fabrication, and general workshop applications. The original Milwaukee metal carrying case adds vintage appeal and provides convenient storage and transportation.

Asking Price: $85 for the Complete Set

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Chicago Electric Drill Bit Sharpener

Manufacturer: Chicago Electric Power Tools
Item Number: 36585
Type: Benchtop Electric Drill Bit Sharpener
Voltage: 110V AC, 60Hz
Motor Speed: 1,600 RPM
Features: Adjustable Sharpening Mechanism and Built-In Electric Motor
Power Cord: Included
Quantity: 1

Condition: Used, fair cosmetic condition with dust and general signs of workshop use. Features a compact benchtop design with an adjustable sharpening mechanism. Power cord is included.

Purpose: Electric drill bit sharpener designed to restore cutting edges on dull twist drill bits, helping extend their useful life. Suitable for marine maintenance, metalworking, woodworking, automotive repairs, and general workshop applications.

Asking Price: $25

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Pacific Hydrostar 212cc Gasoline-Powered Full Trash Pump

Manufacturer: Pacific Hydrostar
Item Number: 69746
Type: Heavy-Duty Gasoline-Powered Full Trash Pump
Engine: 212cc, 4-Stroke OHV Gasoline
Maximum Flow: 264 Gallons Per Minute (GPM)
Maximum Discharge Head: 85 Feet
Maximum Suction Head: 26 Feet
Solids Handling: Up to Approximately 0.9 Inches
Packaging: Original Box
Quantity: 1

Condition: NEW – NEVER USED. Pump remains in its original packaging, which has been opened for inspection. Accessories and included components should be confirmed against the manufacturer's original packaging list.

Purpose: Heavy-duty gasoline-powered trash pump designed for high-volume water transfer, dewatering, drainage, and pumping water containing small debris and solids. Suitable for construction sites, agricultural operations, flood cleanup, property drainage, and general water-management applications. May also be useful for appropriate marine and dockside dewatering projects.

Asking Price: $200

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Assorted Heavy-Duty C-Clamps (8-Piece Lot)

Manufacturers: Wilton, BABCO, and Other Manufacturers
Type: Heavy-Duty Steel C-Clamps
Sizes: Approximately 2–8 Inches
Construction: Heavy-Duty Cast-Metal Frames with Threaded Steel Screws
Quantity: 8 Clamps – Sold as One Lot

Condition: Used, fair to good cosmetic condition with surface rust, paint wear, and general signs of age and workshop use. Includes several vintage American-made clamps in assorted sizes. Threaded screws and clamping surfaces should be inspected before use.

Purpose: Heavy-duty C-clamps designed for securely holding materials during woodworking, metal fabrication, welding, assembly, and general repair projects. Suitable for marine maintenance, boat repairs, machine shops, carpentry, and general workshop applications. Assorted sizes provide flexibility for a variety of clamping needs.

Asking Price: $25 for All 8 Clamps

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the items.

Bauer 20V Cordless Transfer Pump – Item #56733

Manufacturer: Bauer (Harbor Freight)
Model / Item Number: 56733
Type: Cordless water transfer pump
Power: 20V lithium-ion battery system
Included: Pump, suction hose, mounting base, hose fitting/accessory, power adapter/charger (as pictured), and original Bauer box
Battery: Not included
Quantity: 1

Condition: Appears very clean, with minimal visible wear. Original packaging included.

Purpose: Portable water transfer pump suitable for draining tanks, removing standing water, transferring water between containers, and general maintenance applications. Useful for boats, workshops, and other locations where portable pumping is needed.

Asking Price: $30

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Chicago Electric 14" Abrasive Cut-Off Saw

Manufacturer: Chicago Electric Power Tools
Model / Item Number: 44829
Type: Heavy-duty abrasive metal cut-off saw
Motor: 120V, 60Hz, 2 HP
Blade Size: 14-inch abrasive cutting wheel
Speed: 3,400 RPM
Cutting Capacity: Up to 4-inch steel pipe (per manufacturer label)
Quantity: 1

Features: Original orange blade guard, adjustable material vise, abrasive cutting wheel, power cord, and heavy-duty metal base.

Condition: Used, with considerable dust, surface rust, and paint wear. Appears physically complete.

Purpose: Designed for cutting steel pipe, angle iron, metal tubing, rebar, and other metal stock. Suitable for fabrication shops, marine repair facilities, construction, and general metalworking applications.

Asking Price: $75

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Vintage Heavy-Duty Lever-Action Grease Gun

Manufacturer: Unknown
Type: Manual Lever-Action Grease Gun
Construction: Heavy-Duty Metal Cylindrical Body
Features: Long Hand-Operated Lever, Flexible Grease Hose, Metal Grease Fitting Coupler, and Rear Pull Handle
Quantity: 1

Condition: Used, fair cosmetic condition with substantial surface rust, discoloration, and general signs of age and workshop use.

Purpose: Heavy-duty manual grease gun designed for lubricating bearings, machinery, trailer components, agricultural equipment, and marine equipment equipped with grease fittings. Suitable for commercial fishing vessels, boat trailers, automotive maintenance, and general workshop applications.

Asking Price: $20

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Vintage Heavy-Duty Four-Way Lug Wrench

Manufacturer: Unknown
Type: Four-Way Automotive / Trailer Lug Wrench
Construction: Heavy-Duty Solid Steel Cross Design
Dimensions: Approximately 18–19 Inches Across
Socket Ends: Four Different Sizes (Exact Sizes Not Confirmed)
Quantity: 1

Condition: Used, fair cosmetic condition with surface rust, discoloration, and normal signs of age and workshop use.

Purpose: Heavy-duty four-way lug wrench designed for removing and installing wheel lug nuts. Suitable for automobiles, trucks, utility trailers, boat trailers, and other equipment with compatible lug nuts. The cross-shaped design provides additional leverage for loosening and tightening wheel fasteners.

Asking Price: $10

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Vintage Electric Hot Glue Gun with Metal Carrying Case

Manufacturer: Unknown
Type: Corded Electric Hot Glue Gun
Construction: Black Molded Pistol-Grip Housing with Metal Dispensing Nozzle
Accessories: Metal Carrying Case, Assorted Glue Sticks, and Electrical Cord
Quantity: 1 Complete Kit

Condition: Used, fair cosmetic condition with considerable dried glue residue, scratches, dust, and general signs of age and workshop use. Includes metal carrying case with visible wear.

Purpose: Electric hot glue gun designed for bonding and attaching materials in craft projects, light-duty repairs, woodworking, decorative applications, and general workshop use. Suitable for hobbyists, marine interior projects, furniture repairs, and miscellaneous household applications.

Asking Price: $10 for the Complete Kit

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Eaton Heavy-Duty Hydraulic Pump Assembly

Manufacturer: Eaton
Part Number: 70523-LAB
Additional Identification: 080401R122001
Assembly Location: Mexico
Type: Heavy-Duty Hydraulic Pump Assembly (Exact Configuration to Be Determined)
Construction: Heavy Cast-Metal Housing
Drive: Shaft with Coupling Components
Accessories: Mounting Brackets, Steel Mounting Plate, and Separate Coupling
Quantity: 1 Assembly with Associated Hardware

Condition: Used, fair to good cosmetic condition. Red-painted housing shows scratches, chipped paint, surface corrosion, and general signs of industrial or marine service.

Purpose: Heavy-duty hydraulic assembly potentially suitable for commercial fishing equipment, marine deck machinery, industrial hydraulic systems, or other specialized applications. Exact application and compatibility have not yet been determined.

Asking Price: To Be Determined – Offers Entertained

Additional Information Requested: We are seeking additional information regarding this Eaton hydraulic assembly, including its original application, specifications, and potential value. If you recognize this equipment or have knowledge of its intended use, please contact Dave.

All Offers Highly Entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Abalone Harvesting Bars (2-Piece Set)

Manufacturer: Unknown
Type: Handheld Abalone Harvesting Tools (Ab Bars)
Quantity: 2 – Sold as One Set

Yellow Bar: Stainless steel blade with wide, stepped yellow handle and wrist lanyard.

Green Bar: Curved metal blade with textured green handle and wrist lanyard.

Condition: Used, fair to good cosmetic condition with surface wear, discoloration, and general signs of age and marine use.

Purpose: Specialized diving tools designed to separate abalone from rocky surfaces during harvesting. Suitable for collectors of vintage commercial fishing and diving equipment, marine enthusiasts, and individuals interested in traditional abalone harvesting gear.

Asking Price: $20 for the Pair

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the items.

Central Pneumatic Automatic Air Compressor Drain Kit

Manufacturer: Central Pneumatic
Item Number: 56909
Type: Automatic Air Compressor Tank Drain Kit
Components: Clear Flexible Tubing, Brass Fittings, and Valve Components
Packaging: Original Box (Opened)
Quantity: 1 Kit

Condition: Appears unused, with components stored together in a plastic bag inside the original packaging. Box has been opened for inspection. Completeness of the original kit has not been confirmed.

Purpose: Automatic air compressor drain kit designed to discharge accumulated condensation from an air compressor tank, helping reduce moisture buildup, internal corrosion, and maintenance requirements. Suitable for automotive shops, marine repair facilities, commercial fishing vessel maintenance, fabrication shops, and general workshop air compressor systems.

Asking Price: $20

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

International Intertuf 262 Marine Epoxy Coating – Estimated 2/3 full Sealed

Manufacturer: International Paint / AkzoNobel
Product: Intertuf 262
Type: Two-Component, High-Build Protective Marine Epoxy Coating
Color: Off White
Part A: KHA300/5GL – 5-Gallon Container (Nominal Size)
Part B: KHA062/1GL – 1-Gallon Container (Nominal Size)
Quantity: 1 Matching Two-Part Set

Condition: Previously stored marine coating materials. Containers show exterior dirt, scuffing, and normal storage wear. Remaining quantities, age, and suitability of contents have not been established.

Purpose: Heavy-duty industrial marine epoxy coating designed to provide corrosion protection for properly prepared steel surfaces. Common applications include commercial fishing vessels, steel hull structures, ballast tanks, bilges, and other marine or industrial environments where protective coatings are required. Application and surface compatibility should follow manufacturer specifications.

Asking Price: $30 for the Set

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Heavy-Duty Marine Line Hauler / Pot Hauler Assembly

Manufacturer: Unknown
Type: Commercial Fishing Gear Hauling Equipment
Construction: Heavy-Duty Metal Assembly with Large Hauling Sheave, Green Drive Housing, and Mounting Bracket
Drive Type: To Be Confirmed
Quantity: 1 Assembly

Condition: Used, fair cosmetic condition with visible surface oxidation, worn paint, and general signs of age and marine service.

Purpose: Heavy-duty marine hauling equipment designed for retrieving fishing lines, trap lines, and other commercial fishing gear. Potentially suitable for commercial fishing vessels, trap fisheries, and marine deck equipment applications. May also be useful as a replacement assembly or for parts.

Asking Price: $150

Price is suggested, All Offers highly entertained

Additional Information: Manufacturer and exact specifications have not been identified. If you recognize this equipment or have information regarding its original application, please contact Dave.

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

Clear Reinforced PVC Braided Hose – 1/2" × 100-Foot Spool

Manufacturer: Lincoln Products
Type: Clear reinforced PVC tubing
Size: 1/2" nominal inside diameter × approximately 3/4" outside diameter
Original Spool Length: 100 feet
Part Number: 32574
Quantity: 1 spool

Condition: Appears to be in good physical condition, with clear braided hose remaining on the original spool. Some protective wrapping is present. Exact remaining footage has not been measured.

Purpose: Suitable for general water transfer, pump discharge, washdown applications, and other compatible low-pressure fluid systems. Verify pressure and fluid compatibility before use.

Asking Price: $40

Price is suggested, All Offers highly entertained

Contact: Dave Colker
Phone: (805) 663-2152
Location: Channel Islands Harbor, Oxnard, California

Pickup: Available for pickup at Channel Islands Harbor. Call or text to schedule a time to inspect the item.

In addition to this classified ads page, if you are looking to sell or buy gear, hardware, or any other Marine Goods:  Check out Mikes!  Click here to view Mikes Consignment website. or Visit the store at the corner of Harbor and Spinnaker :Ventura Harbor